• From a specialist in automation
  • From planning, to startup and operation, to diagnostics and service
  • From software and controllers to inverters and drive technology
Contact us now
Your benefits

Control any motor
and you only have to get to know, and use, one series of inverters

Functional safety included
from compact devices to modular multi-axis systems with single-axis and double-axis modules

Rapid, straightforward commissioning
as the electronic rating plate supplies all the gear unit and motor data

The NEW ARRIVALS: MOVIDRIVE® application inverters

When developing our new MOVI-C® modular automation system, one of the key things we looked at was whether current inverter technology will cope with the automation tasks of the next few decades. One approach would have been to take pre-existing components that are technically sound, tried-and-tested and, most importantly, reliable – and make them even better.

Instead, we chose to completely re-engineer inverter technology and take automation technology based on MOVI-C® to a whole new level. After all, we believe the future of automation is mapped out in every component, including inverter technology. That is precisely why the MOVI-C® modular automation system includes new MOVIDRIVE® application inverters. Although the name hasn't changed, the inverters have been completely redeveloped and redesigned. The end result is a new inverter platform for all standard motors.

Compact or modular – MOVIDRIVE® controls and monitors all types of motor

The MOVIDRIVE® application inverters are available as single-axis application inverters with rated outputs up to 315 kW and as modular multi-axis systems incorporating single-axis and double-axis modules with rated currents up to 180 A. They exhibit an overload capacity of up to 250% for dynamic motions. Both as single-axis application inverters and in the modular design, "made by SEW-EURODRIVE" inverter technology controls and monitors all types of motors, from synchronous and asynchronous AC motors with/without an encoder to asynchronous motors with LSPM technology or synchronous and asynchronous linear motors. Functional safety is of course built in and even the basic unit incorporates the safety function STO in PL e. More than 15 additional safety functions can be incorporated using safety option cards.

In practical applications, MOVIDRIVE® supports impressively straightforward and fast commissioning

To get your motor up and running, you can read off and input the type designation on the motor's electronic rating plate. Alternatively, you can also use the electronic catalog in the MOVISUITE® engineering software.

If your motor is not recognized, that's no problem either, as it can be brought into operation simply by using a calibration function. What's more, energy-saving functions such as regenerative power supply units, energy storage units and a standby mode ensure optimum energy efficiency. During breaks in operation, standby mode reduces the power consumption of the application inverter by up to 85% – without losing communication with the overarching PLC.

Applications are put into operation using both graphical editors, which make it incredibly easy to create motion functions, and automatic IEC code generation, which is an entry-level sequence programming solution.

MOVI-C® ensures everything falls into place

Everything falls into place in our new MOVI-C® modular automation system – the engineering software matches the control and inverter technology and everything comes together seamlessly with the drive technology.

Tell us what you need and we will offer you a customized, future-proof automation solution.

Our Belgian Addresses Worldwide locations
  • One inverter family for all motors – control and monitor all
    • Synchronous and asynchronous AC motors with/without an encoder
    • Asynchronous motors with LSPM technology
    • Synchronous and asynchronous linear motors
  • Extremely easy startup using the electronic nameplate or the electronic catalog
  • Simple startup of unknown motors using the calibration function
  • Energy-saving functions for partial load operation and standby mode
  • V/f: highly robust for asynchronous motors without encoders
  • VFCPLUS: highly diverse for asynchronous motors with and without encoders
  • CFC: highly dynamic for asynchronous and synchronous motors with encoders
  • ELSM®: highly efficient for synchronous motors without encoders

A digital data cable makes the motor an active part of your data network, providing all motor data – such as encoder data, temperature data, commissioning data, and data from other sensors – to the application inverter and the connected networks at any time. This information can be used to capture detailed operational data and compile maintenance forecasts. As the type designations, serial numbers and logistics data associated with motors are identified and supplied automatically, an inventory of all the drives in a plant can be compiled automatically at the touch of a button. Repairs, exchanges and enhancements can be tracked and traced at any time.

  • Intelligent, digital connection using just one standardized hybrid cable to connect data transmission and power supply lines between the motors (synchronous machine and asynchronous machine) and the application inverters:
    • The data line is linked to the application inverter using a series-standard coaxial connector
    • Plug connector on motor or, alternatively, terminal box connection for on-site assembly
  • Available for motors up to size 315
  • Extremely robust, high-performance design for data transmission with coaxial data cable, ideal for especially space-saving installations
  • Also suitable for very long cables measuring up to 200 m
  • Fully integrated digital motor encoder in various designs
  • Data memory in the motor for drive and application data, automatic start-up of the application inverter without engineering tool
  • MOVILINK® DDI digital data interface for transmitting:
    • Information from the electronic nameplate
    • Brake and diagnostic data (e.g. temperature sensor data)
    • Encoder data, safe and non-safe
  • Brake control integrated into the motor for synchronous and asynchronous drive technology:
    • For holding brakes and working brakes
    • No need for brake control device in the control cabinet
    • Continuous electronic detection of switching status and brake wear
    • Transmission of brake diagnostic data via data interface to application inverter
    • Condition-based maintenance intervals, forward planning of maintenance work, wear information, even for difficult-to-access drives

Integrated into the inverter technology

Due to the requirements laid down in technical standards and the drive to have humans and machines working hand in hand, the number of plant areas equipped with functional safety technology is constantly growing. As a result, functional safety is an integral part of any application.

By introducing MOVISAFE® CS..A safety cards, SEW EURODRIVE has made functional safety an integral element of all MOVI C® application inverters. Even the basic unit in the MOVIDRIVE® series features STO in PL e. All higher-level safety functions are achieved by inserting an option card, including all the necessary connections to the inverter technology – encoder, communication and STO. This helps you reduce costs to only what is necessary to achieve the functions you actually need.

Functions in the basic unit

  • STO (safe torque off)
  • SIL 3 to EN 61800-5-2, EN 61508
  • PL e to EN ISO 13849-1
  • Can be activated via safe inputs
  • Can be activated via safe communication if a CS..A safety card is inserted
  • Extremely short response times of 2 ms enable small safety clearances

MOVISAFE® safety card functions

  • Five scalable safety cards as appropriate to application requirements
  • More than 15 higher-level safety functions can be incorporated by inserting option cards
  • Can be inserted retrospectively at any time, no additional external cables needed
  • Also with additional multi-encoder input
  • Safe communication via PROFIsafe/PROFINET and FSoE – Fail Safe over EtherCAT®
  • STO safety function with PLe integrated in basic unit
  • Secure communication via PROFINET / PROFIsafe and EtherCAT® / FSoE
  • High-quality safety functions in the MOVISAFE® safety card, type CS...A:
    • STO, SS1, SS2, SBC, SBT, SOS, SLS, SSR, SLA, SSM, SLI, SDI, SCA, SLP
    • Just plug in the option card; no external connection cables are required for the encoder, communication or STO connection
    • Easily replace cards and devices using the pluggable memory key in the safety option
  • Easily start up the unit by entering parameters
  • Diagnostics and scope functions are fully integrated in the engineering software
  • For simple control of the STO, the safe inputs feature P/P and P/M topology
  • All safety parameters are part of the inverter data set; in the case of a unit replacement, all that is needed is to import the inverter data set into the new device
  • Both process and safety values can be recorded in the Scope diagnostics tool – this facilitates troubleshooting and diagnostics
Hardware MOVISAFE®
CSB21A
MOVISAFE®
CSB31A
MOVISAFE®
CSS21A
MOVISAFE®
CSS31A
MOVISAFE®
CSA31A
Safe inputs 4 4 4 4 4
Safe outputs - 2 2 2 2
Safe stop function STO, SS1c STO, SS1c, SBC STO, SS1c, SBC STO, SS1c, SBC STO, SS1c, SBC, SBT
Safe motion function - - SOS, SS1b, SS2, SLS, SSR, SLA, SSM SOS, SS1b, SS2, SLS, SSR, SLA, SSM SOS, SS1b, SS2, SLS, SSR, SLA, SSM
Safe positioning function - - SLI, SDI SLI, SDI SLI, SDI, SCA, SLP
Safe communication PROFIsafe, FSoE PROFIsafe, FSoE PROFIsafe, FSoE PROFIsafe, FSoE PROFIsafe, FSoE
Additional multi-encoder input - Yes - Yes Yes

MOVIDRIVE® modular

Compact multi-axis system comprising power supply modules, regenerative power supply modules, and single-axis and double-axis modules

  • Up to 30 drives to one power supply module
  • Up to 800 m overall machine cable length
  • Control via MOVI-C® CONTROLLER
  • Particularly compact design
  • Master module for compact integration of the MOVI-C® CONTROLLER
  • Power supply modules, with energy recovery and energy storage management options
  • Available as EtherCAT® CiA402 profile variant
  • Intelligent grid power and energy management with Power and Energy Solutions

MOVIDRIVE® system

Single-axis application frequency inverter with its own power supply connection:

  • Perfect addition to the multi-axis system for high outputs or long motor cables
  • Up to 1200 m motor cable length
  • Control via MOVI C® CONTROLLER
  • Available as variant with EtherCAT® CiA402 profile

MOVIDRIVE® technology

Single-axis application frequency inverter with its own power supply connection and direct fieldbus connection via plug-in fieldbus interfaces. In addition to the features of MOVIDRIVE® system, MOVIDRIVE® technology offers:

  • Commissioning via plug-in operating devices or engineering software
  • Integrated memory card to back up device data
  • Integrated 24 V DC switched-mode power supply unit
  • Alphanumeric or fully-graphic control unit for commissioning the frequency inverter and MOVIKIT® software modules
Technical Data
  MOVIDRIVE®
modular
MOVIDRIVE®
system
MOVIDRIVE®
technology
Nominal Voltage
V
3 x AC 380 – 500 3 x AC 200 – 240
3 x AC 380 – 500
Rated output – power supply module
kW
10 - 110 -
Rated output, regenerative power supply module, block-shaped
kW
50 - 75 -
Rated output
current – single-axis
module kW
- 0.55 – 315
Rated output current, single-axis module
A
2 - 180 -
Rated output current, double-axis module
A
2 - 8  
Overload capacity 250 % 200 %
Overview of options Multi-encoder input in the basic unit, encoder option for additional EtherCAT® encoder interface, extension for inputs and outputs, regenerative power supply, braking resistors, line choke, line filter, output chokes, output filter